Bernina 590 - Thread Management: Upper and Bobbin

Sewing preparation
48
> Guide the thread through the guides (6/7) above the foot.
6
7
> Switch the machine on.
> Press the semi-automatic threader lever (8) slightly down, keep pressed and pull the thread to the left
beneath the gray threader hook (9).
8
9
> Guide the thread around the gray threader hook from the left to the right (11).
> Press the threader lever down as far as it will go (10) and then pull the thread from the left to the right
(11) through the threader slot (12) until it hooks into the small wire hook.
> Pull the thread over the thread cutter (13) from the back and cut.
11
10
12
13
> Release the lever to thread.