101
Buttonhole
Securing the Cord
pull the cord through the buttonhole until the loop ►
disappears into the end of it
pull the ends of the cord through to wrong side of the
►
fabric
knot or secure with stitches ►
Buttonhole Cutter and Block
(Special Accessory)
place the fabric on the wood block ►
place the cutter in the center of the buttonhole ►
press down on the cutter with your hand or a hammer ►
Cutting Open the Buttonhole
Seam Ripper
using the seam ripper, cut from the ends towards the ►
middle
In order not to cut the ends of short button-
holes by mistake, place a pin at the end of the
buttonhole for additional security.
To Next Page
