90
Practical Applications
Edge Finishing
Narrow Edgestitching
Outer Edges
place edge of fold against the guide on the Blindstitch ►
foot
select needle position at desired distance from the
►
folded edge
Hem Edges
place edge of fold against the guide on the Blindstitch ►
foot (inside upper edge of hem)
select needle position to the right to sew along the
►
upper edge
Wide Edgestitching
There are three options for wide edge stit-
ching
guide the folded edge along the edge of the presser foot ►
guide the folded edge along the marks on the stitch ►
plate (for stitching 3/8” to 1” from the edge (1 to 2.5cm)
insert the adjustable seam guide into the hole on the
►
back of the presser foot shaft
adjust as desired ►
tighten the screw ►
guide the folded edge along the seam guide ►
to sew parallel wider lines, guide the seam guide along ►
a previously sewn line of stitches
Reverse pattern foot no. 1C ►
Blindstitch foot no. 5 ►
Edge stitch foot no. 10 / 10C / 10D ►
(optional accessory)
foot no. 5: ►
use any left or far right needle position
foot no. 1C and no. 10 / 10C / 10D: ►
any needle position is possible
To Next Page
