91
Practical Applications
Overcasting
with Zig-Zag Stitch no. 2
guide edge of fabric into the center of the presser foot ►
do not select too wide a width or too long a stitch – the ►
edge should lie flat and not roll
needle goes into fabric on one side and over the edge
►
into the air on the other side
use a fine darning thread for lightweight fabric ►
Satin Stitch
dense stitch used for appliqué, embroidery, etc. ►
shorten stitch length, satin stitch setting will be indicated ►
by parallel lines on stitch length bar
Reverse pattern foot no. 1C ►
If edges roll:
use the Vari-overlock stitch and foot ►
no. 2A
The sewing computer has a programmed satin
stitch: no. 1354
To Next Page
Loading...
