112
BSR
Needle Stop Down (Default) / Up
the arrow points down on the display = the sewing ►
computer stops with needle down, when taking foot off
foot control or engaging the Start-Stop-button
press the needle stop button until the arrow points up = ►
the sewing computer stops with needle up, when taking
foot off foot control or engaging the Start-Stop-button
Raise or Lower the Needle
press the needle stop button - or by pressing the heel ►
on the foot control, the needle can be lowered or raised
Securing With the Start-Stop-Button
(only Mode 1)
unplug the foot control ►
place the fabric under the presser foot, lower presser ►
foot
hold upper and lower thread and start the BSR mode by ►
pressing the Start-Stop-button
sew 5 to 6 securing stitches ►
stop the BSR mode by pressing the Start-Stop-button ►
cut threads ►
re-start the BSR mode by pressing the Start-Stop-button ►
to continue the stitching process
Securing Function (only Mode 2)
press the «Securing Function» button ►
press the foot control / Start-Stop-button ►
short securing stitch sequence are sewn as soon as the ►
fabric is moved under the presser foot. After the
sequence is sewn the set stitch length will be activated
and the securing function will be automatically deactiva-
ted
Free Motion Quilting (only Mode 2)
the BSR mode is activated ►
freemotion quilting can be sewn ►
when the securing function button is pressed during free ►
hand quilting, a short securing stitch sequence is sewn
and the sewing computer will stop sewing automatically
the BSR mode is deactivated ►
Free Motion Quilting without BSR
activation
touch the BSR button (on the left side on the display) ►
the BSR mode is deactivated, the buttons «BSR1» and ►
«BSR2» on the left side on the display go off
normal freemotion quilting can now be sewn with the
►
BSR foot, without automatic regular stitch length
Functions in the BSR mode
To Next Page
