Bernina 830LE - Automatic - Simple Darning Program No. 22; Reinforced Darning Program No. 23

93
Practical Applications
Automatic - Simple Darning Program no. 22
Replaces threads along the lengthwise grain in all fabrics.
Preparation
place a piece of lightweight stabilizer under the worn ►
area before darning if necessary
Sewing
sew the first row and stop ►
press and release the Quick Reverse button at the ►
desired length; this programs the first length
continue sewing; the sewing computer stops automati- ►
cally
Reinforced Darning Program no. 23
Replaces threads along the lengthwise and crosswise
grains in all fabrics.
Preparation
place a piece of lightweight stabilizer under the worn ►
area before darning if necessary
Sewing
insert the needle in the top left of the worn area ►
sew the first vertical row ►
press and release the Quick Reverse button at the ►
desired length; this programs the length needed
continue sewing; the sewing computer stops automati- ►
cally when finished
Reinforced Darning Program no. 34
The Darning Program no. 34 is particularly useful for
mending heavy weight or durable garments, such as jeans
and overalls.
Reverse pattern foot no. 1C ►
Automatic buttonhole foot no. 3A ►
Automatic buttonhole foot no. 3A ►
R
e
i
n
f
orce
d
D
arn
i
n
g
P
ro
g
ram no. 23
If the darning becomes distorted
Correct with the Balance function see page 48
I
C
c
R
e
i
n
f
orce
d
D
arn
i
n
g
P
ro
g
ram no. 3
4
If the darning does not cover the whole
worn or damaged area
Reposition the work under the foot to continue
covering the worn or damaged area. Begin
sewing; the program will repeat as often as
desired (the length is saved).
I
w
R
c
s
Reverse pattern foot no. 1C ►