69
Buttonholes
Programming
the length of the buttonhole is automatically measured ►
with the buttonhole foot with slide no. 3A. The sewing
computer automatically switches to the next sewing
stage after reaching the maximum length
for buttonholes of 4-31mm, depending on the buttonhole ►
type
No. 51, 52, 53
Sewing First Bead
the stitching sequence is displayed in the Stitch Altering ►
Area
sew the first bead forwards and stop at the required ►
length
Programming the Buttonhole
press the Quick Reverse button, continue sewing ►
«auto» and the programmed length (in mm) appears in ►
the display = buttonhole length is programmed
Auto Buttonhole
The sewing computer sews automatically:
straight stitches in reverse ►
first bartack ►
2nd bead forwards ►
2nd bartack ►
secures stitches, stops and automatically goes to the ►
beginning of the buttonhole
All additional buttonholes are now automatically sewn in
the same length in one step.
Standard and Stretch Buttonhole
No. 54 - 58
Sewing Straight Stitches
sew straight stitches forwards, stop at required length ►
Programming the Buttonhole
programming is done as for the other buttonholes ►
Auto Buttonhole
The sewing computer sews automatically:
round or eye part of buttonhole ►
first bead in reverse ►
straight stitch forwards ►
second bead in reverse ►
bartack ►
secures stitches, stops and automatically goes to the ►
beginning of the buttonhole
Round and keyhole buttonholes
Automatic Buttonhole
Both beads are sewn in the same direction.
To Next Page
