Bernina 830LE - BERNINA Dual Feed; BERNINA Dual Feed Description

115
BERNINA Dual Feed
With the BERNINA Dual Feed the top and bottom layer of
fabric are fed simultaneously, the even feeding enabling
perfect matching of striped and checkered patterns.
BERNINA Dual Feed Description
Presser Feet Selection
Reverse pattern foot 1D (standard accessory) ►
Zipper foot 4D (standard accessory) ►
More «D» presser feet are listed in the enclosed accesso-
ries catalogue.
Switching On BERNINA Dual Feed
raise the presser foot ►
press dual feed down until it engages ►
Switching Off BERNINA Dual Feed
raise the presser foot ►
hold dual feed on black holder with two fingers, pull it ►
down, then push backward, slowly letting it slide upward
W
i
t
f
a
br
pe
rf
Only use «D» presser feet with cut-out at
the center back.
If an incorrect presser foot is attached, the
sewing computer will not start with the
dual feed engaged. An error message will
appear.
O
n
the
If
a
se
w
dua