12
Preparation
Power Switch / Power Cable
Power SwitchA
The sewing computer is switched on («I») and off («0»)
with the power switch.
I the sewing computer is switched on
0 the sewing computer is switched off
Power connectionB
Foot control connectionC
PC connectionD
USB stick connectionE
Free-Hand-System (FHS) Presser Foot Lifter
The FHS is used to raise and lower the Presser Foot.
Attaching the Free Hand System
insert into the opening; you should be able to operate ►
the FHS with your knee in your normal sitting position
Raising and Lowering the Presser Foot
with knee push FHS to the right ►
the presser foot is raised and the feed-dog is lowered ►
simultaneously. Tension is released
the feed-dog is raised as soon as the first stitch is sewn ►
A B
C
D
E
If the sewing computer is kept in a cold room,
place it in a warm room for 1 hour before use.
(USA/Canada only):
The sewing computer has a polarized
plug (one blade wider than the other). To
reduce the risk of electrical shock, this
plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician
to install the proper outlet. Do not modify
the plug in any way!
To Next Page
Loading...
