29
Overview
Slide Speed Control
the motor speed is infinitely ►
variable with the slide
Altering Needle Positions
touch left button – the needle ►
moves to the left
touch right button – the needle ►
moves to the right
quick change – hold the button ►
down
total of 11 needle positions ►
(5 left, 5 right, 1 center)
Stitch Width/Length (Multi-
function) Knobs
to adjust stitch width or length ►
to alter thread tension ►
to alter presser foot pressure ►
to adjust the sewing direction when ►
in «directional sewing»
to adjust button size or the slit size
►
of the buttonhole
to adjust the balance ►
Presser Foot Position
touch the button = the presser foot is lowered ►
and raised slightly again so the fabric can be
easily positioned. When sewing starts the foot
is lowered on to the material
touch the button again = the presser foot is ►
raised and the Feed-dog is simultaneously
lowered
Automatic Securing Program
touch the button before the sewing starts or ►
during sewing = single patterns are secured at
the end, with the selected number of stitches
programmed
touch the button before starting a combination ►
= the first pattern is secured at the end, with
the number of stitches programmed
touch the button while stitching a combination
►
= the active pattern is secured at the end, with
the number of stitches programmed
the sewing computer stops automatically after
►
all securing variations
the number and type of the securing stitches
►
can be programmed in the setup program
To Next Page
