9.1 Live Display
78
Section 9 Operation of the Radiometric
Bulk Flow Meter
9.1 Live Display
Start measurement: Push <run> button
Result display (Live display):
Load t/h, kg/h
Totalizer (t or kg)
Dry Totalizer (t or kg)
Moisture %
Act. Speed m/s
Live Curr. mA
Live cps
Tare cps
Det. temp. °C
Scroll in live display
: <+>- or <-> button.
Stop measurement:
Push <run> button once more.
9.2 Regular Operation
9.2.1 Results
During measurement, the current conveyor load is displayed, the
total tonnage is integrated in the mass integrator over the entire
measuring time. The mass integrator can be set via the option
Erase mass integrator yes/no in the Measuring Parameter
menu so
that is cleared after each run.
During measurement operation, the mass integrator can be reset
to zero any time with the <clear> button.
The printout can be made as minute or shift printout.
To Next Page
Loading...
