Berthold LB 4700 - Software Update

7 Troubleshooting
LB 4700
60
56926BA2, Rev. 02, 04/2019
Code
Text
Description
Namur107
Correction
System
D101
HW
module
corrupted
Corrupt hardware
electronics
module
F
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
D102
Device
data-set
Permanent
memory error, no
parameter set
was found.
F
Perform a factory reset and/or
restart the device.
If the event occurs frequently,
contact BERTHOLD.
D103
RAM
error
Error in RAM.
F
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
D104
Device
error
System error
F
If the event occurs frequently, contact
BERTHOLD.
D105
RTC
date/time
Error in the real-
time clock. F
Reset the date and time.
Restart the device.
The event must be confirmed manually.
D106
WD Reset
The watchdog
has triggered
a restart
of the device.
S
If the event occurs frequently, contact
BERTHOLD.
Verify whether massive electromagnetic
disturbances have triggered the event.
Main Board
D200
Data flow
Error during
execution
of the software
F
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
D201
Supply
5.0V
Hardware error
F
Contact BERTHOLD.
The hardware is defective and, if
necessary, must be checked and
replaced.
D202
Supply -
5.0V
Hardware error
F
Contact BERTHOLD.
The hardware is defective and, if
necessary, must be checked and
replaced.
D203
Pt100
Temperat
ure
Error when
reading the Pt100
input. The last
valid temperature
value is kept.
F
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
The event must be confirmed manually.
Detector
D300
Data flow
Error during
execution
of the software.
F
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
D301
ADC
calibratio
n
Hardware error
S
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
The event must be confirmed manually.
D302
DAC
calibratio
n
Hardware error
S
Restart the device.
If the event occurs frequently, contact
BERTHOLD.
The event must be confirmed manually.