Biamp AudiaFLEX - Page 104

104
Messages
: Specified Audia unit #__ is not in the Equipment Table.
Specified Audia unit #__ is not selected for use.
Explanation
: Some DSP blocks have been assigned as fixed allocations in a
specific Audia unit which is not available or selected for use.
Messages
: Too many audio inputs required for fixed allocations in unit #__.
Too many audio outputs required for fixed allocations in unit #__.
Too many I/O channels required for fixed allocations in unit #__ (FLEX units).
Unit #__ has no CobraNet communication module.
Too many CobraNet inputs or outputs allocated to unit #__.
Explanation
: The number of audio channels assigned as fixed allocations in a
specific Audia unit exceeds the capacity of that unit.
Message
: A suitable I/O card cannot be found in unit #__ for one or more I/O blocks
with fixed allocations.
Explanation
: The specified FLEX unit does not include the appropriate I/O card type(s)
to match blocks which are assigned to that unit through fixed allocations.
Message
: The '__' block (object code '__') at [__,__] cannot be placed into the
Audia unit to which it is allocated.
Explanation
: The Audia unit does not support the I/O type which is represented by the
specified block.
Messages
: Insufficient DSP power for fixed allocations in unit #__: ___% of
capacity requested.
Explanation
: The DSP resources assigned as fixed allocations in a specific
Audia unit exceed the capacity of that unit.
Message
: Gang #__ requires too many resources.
Explanation
: The component objects allocated to the specified gang require more
resources (audio channels, CobraNet channels, and/or DSP power)
than is available from any current Audia unit.