Binder vdl 23 - Control On;Off Menu; RD4 Controller; Functions On;Off Menu

VDL (E3) 09/2019 Page 107/234
Example:
Activated function “ Standby ” = 000000000000000
1
Deactivated function“ Standby ” = 000000000000000
0
11.1.1.2 “Control on/off” menu
More functions are available via the “Control on/off” menu.
Press the Setpoint setting icon to access the “Setpoint” setting menu from Normal display..
Path: Setpoint > Control on/off
• Function “Temperature” (temperature control, chap. 11.4)
• Function “Pressure” (pressure control,chap. 11.5)
“Setpoints” menu.
Select the field “Control on/off”.
Mark / unmark the checkbox to activate / deactivate the
desired function and press the Confirm icon
11.1.2 RD4 controller
Required access level: “User”.
11.1.2.1 “Functions on/off” menu
In the “Functions on/off” menu you can define the switching state of three special controller functions.
Path: Normal display Setpoints Functions on/off
The functions are displayed from left to right.
Example: Function 1 activated = 1000. Function 1 deactivated = 0000.
Submenu “
Functions on/off
”.
This view shows the switching states four functions. Functions 1, 2,
and 3 are available with the present chamber type.
“1” = Function activated
“0” = Function deactivated
Functions on/off
Press the OK button to access the first individual function. With the arrow-down button you can pro-
ceed to the subsequent functions.
• Function 1 “Standby”
• Function 2 “GAS/AIR 2” (chap. 11.2)
• Function 3 “Close all valves” (chap. 11.3)