Binder vdl 23 - Settings Submenu; Service Submenu

VDL (E3) 09/2019 Page 85/234
8.1.5.2 “Settings” submenu
The “Settings” submenu is available for users with “Service” or “Admin” authorization level. It serves to
enter date and time, select the language for the controller menus and the desired temperature unit and to
configure the controller’s communication functions.
Path: Main menu > Settings
Setting the temperature unit, menu language… chap. 13.1.1,
Setting date and time chap. 13.1.2
Setting the display brightness, continuous opera-
tion and screen saver
chap. 13.1.4
Settings for the measurement chart: storage inter-
val, storage values, minimum and maximum valu-
es
chap. 23.2
Setting the tolerance range and delay time for
tolerance range alarm
chap. 15.1
(not used)
Entry of the MAC address and IP address chap. 20.1.1
Password protection for web server access chap. 20.1.2
Configuration of the e-mail server, assignment of
e-mail addresses
chap. 20.1.3
Back to main menu
8.1.5.3 “Service” submenu
The “Service” submenu is available for users with “Service” or “Admin” authorization level. When logged-
in with “Admin” authorization level the user will find information to tell the BINDER Service in service
case.
Path: Main menu > Service
Serial number of the chamber, setup version of
the controller software
chap. 13.1.8
No function
Information for BINDER Service
Reset to factory settings
Back to main menu
(view with “Admin” authorization level)