VDL (E3) 09/2019 Page 113/234
11.5.2 RD4 controller
Path: Normal display Pressure control
Press the OK button to enable the setting.
Setting the “Pressure control” function.
Use the arrow buttons to select between “On” (pressure control acti-
ve) and “Off” (pressure control deactivated).
Confirm the setting with the OK button.
After confirming with the OK button or with the Back button you go back to Normal display.
If the setting “Off” (pressure control deactivated) has been selected, the information message “Pressure
control off” is displayed. The „Info“ icon flashes slowly.
The actual pressure value continues to be displayed in Normal display.
To Next Page
Loading...
