Chapter 6 Exporting Images
Exporting to a USB Flash Drive or External Hard Drive
Note: The flash drive or external hard drive must meet the following requirements:
n Supports USB 2.0 or above
n Is recognized on a formatted Windows computer
n Has no encryption software or other software add-ons on the drive
Image Lab Touch exports images to a folder created on the flash drive or external hard
drive with the name Chemidoc Touch Images followed by a time stamp of the image export,
for example, Chemidoc Touch Images 2015-04-29_19.08.51.
To export images to a USB flash drive or external hard drive
1. Insert a USB flash drive in or connect an external hard drive to the ChemiDoc Touch
USB port.
2. Do one of the following:
n Navigate to Image View by acquiring an image or by opening an image in the
Gallery.
n Select the images you want to export in the Gallery.
3. Tap Send/Save.
4. Tap Save to USB Drive.
A progress bar monitors the image export.
5. When the export is completed, tap OK.
100 | ChemiDoc Touch Imaging System
To Next Page
Loading...
