Renaming Images
Renaming Images
When you acquire an image, the system assigns it a default name.
An image name can consist of 190 alphanumeric characters. Spaces are permitted except
at the beginning and end. The following characters cannot be used:
\ / : * ? “ < > |
Case does not matter.
To rename an image in the Gallery
1. Select an image.
2. Tap Rename.
3. In the dialog box, enter a name for the image.
4. Tap OK.
To rename multiple images in the Gallery
1. Select more than one image.
2. Tap Rename.
3. In the dialog box, enter a name for the first image.
4. Tap OK.
The system labels the remaining images with the same name as the first image plus a
consecutive number. For example: ChemiBlot_1, ChemiBlot_2, and so on.
To rename an image in Image View
1. In Image View, tap Image Info.
2. In the Image Info dialog box, tap the Name box.
A keyboard appears.
User Guide | 87
To Next Page
Loading...
