Bioness NESS H200 Wireless - Charge Indicator Light; Connector Port; On;Off Button; SD (Secure Digital) Slot

38
Clinician's Guide
On/Off Button
Used to turn on/off the Clinician’s Programmer.
Charge Indicator Light
The charge indicator light is YELLOW when the Clinician’s Programmer is charging and
GREEN when the Clinician’s Programmer battery charge is complete.
SD (Secure Digital) Slot
The SD slot is for the SD card, used to back up and restore the Clinician's Programmer
database.
Connector Port
Used to connect the Clinician’s Programmer to the communication connector cable on the
HP iPAQ Configuration Cradle.
HP iPAQ Configuration Cradle with Stylus
The HP iPAQ Configuration Cradle connects the Clinician’s Programmer to the H200 Wireless
Control Unit and to the Clinician’s Programmer Charger. The stylus is for software navigation.
HP iPAQ Clinician’s Programmer Charger
Used to charge the Clinician’s Programmer battery. Use only the Clinician’s Programmer
Charger included in the H200 Wireless Clinician’s Kit.