80
Clinician's Guide
Figure 8-24: Program B window.
Program B—Open Hand
Program B activates the extensor muscles only. Pressing Start starts the program. Cyclical
hand extension is followed by a period of relaxation, and then hand extension repeats. The
program shuts down automatically after the total time has elapsed (range: 5–120 minutes).
Stimulation intensity, the duration of extension and relaxation, and total time are adjustable.
See Figure 8-24.
To configure Program B:
1. Select Program B.
2. Adjust open time, stimulation off time, and total time.
3. Press Start. The program countdown clock will appear at the bottom of the screen.
4. If needed, adjust stimulation intensity.
5. Allow the program to continue for the total time or press Stop.
6. Press Done to return to the Program Settings window.
Note: The active program phase will be highlighted in ORANGE.
Note: Adjustments to stimulation intensity affect all programs except Key Open.
To Next Page
Loading...
