BK Precision PVS10005 User Manual

82
:VOLTage?
Return the measured output voltage
MEMory
Memory subsystem
[:NUMber] <NR1 | ?>
Select or return memory number,
range 1-9
:ISET <NRf | ?>
Set or return current value
:SAVE
Save memory subsystem parameters
:VSET <NRf | ?>
Set or return voltage value
OUTput
Output subsystem
[:STATe] <bool | ?>
Set or return the output state
:LIMit
:CURRent <NRf | ?>
Set or return current limit value
:VOLTage <NRf | ?>
Set or return voltage limit value
:PROtection
:CLEar
Reset latched protection
:SLOPe
:CURRent <NRf | ?>
Set or return current slewrate value
:VOLTage <NRf | ?>
Set or return voltage slewrate value
:MODE?
Return output mode(CV or CC)
PROGram
Program subsystem
[:NUMber] <NR1 | ?>
Select or return program number,
range 1-9
:CLEar
Clear program n parameters
:ALL
Clear all program parameters
:NEXT <NR1 | ?>
Set or return next program number
(1-9, 0 is none)
:REPeat <NR1 | ?>
Set or return repeat number
:RUN <Bool | ?>
Start/stop or return the program
running state
:STATe <Bool | ?>
Set or return program ON/OFF state
:STEP

BK Precision PVS10005 Specifications

General

Output Current	0-5 A
Number of Outputs	1
Display Type	LCD
Weight	4.5 kg (9.9 lbs)
Current Resolution	1 mA
Load Regulation (CV)	≤ 0.01% + 2 mV
Line Regulation (CV)	≤ 0.01% + 2 mV
Temperature Coefficient	≤ 100 ppm/°C
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Input Voltage	100 - 240 VAC, 50/60 Hz
Current Accuracy	0.1% + 5 mA
Humidity	Up to 80% RH, non-condensing
Cooling	Fan