Black Box LES1508A - Page 283

_____________________________________________________________________
724-746-5500 | blackbox.com Page 283
noauth
snmpwalk -Oa –v3 –l noAuthNoPriv –u readonlyusername -M .:/usr/share/snmp/mibs im4004 OG-STATUS-
MIB::ogStatus
auth
snmpwalk -Oa –v3 –l authNoPriv –u readonlyusername –a SHA –A “authpassword” -M .:/usr/share/snmp/mibs
im4004 OG-STATUS-MIB::ogStatus
priv
snmpwalk -Oa –v3 –l authNoPriv –u readonlyusername –a SHA –A “authpassword” –x DES –X “privpassword” -M
.:/usr/share/snmp/mibs im4004 OG-STATUS-MIB::ogStatus
-l
Security Level
-u
Security Name or Read Only Username
-a
Authentication Protocol – SHA or MD5
-A
Authentication Password
-x
Privacy Protocol – DES or AES
-X
Privacy Password
A mib browser may be used to explore the Black Box enterprise MIB structure. For example, the ogStatus tree is shown
below:
15.5.4 Adding multiple remote SNMP managers
You can add multiple SNMP servers for alert traps add the first and second SNMP servers using the Management
Console (refer Chapter 7) or the command line config tool. Further SNMP servers must be added manually using config.