EasyManua.ls Logo

Black Box LES1508A - Page 284

Black Box LES1508A
334 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
_____________________________________________________________________
724-746-5500 | blackbox.com Page 284
Log in to the console server’s command line shell as root or an admin user. Refer back to the Management Console UI or
user documentation for descriptions of each field.
To set the SNMP Manager Address field:
config set="config.system.snmp.address3=w.x.y.z"
.. replacing w.x.y.z with the IP address or DNS name.
To set the Manager Trap Port field
config --set=”config.system.snmp.trapport3=162”
.. replacing 162 with the TCP/UDP port number
To set the SNMP Manager Protocol field:
config --set="config.system.snmp.protocol3=UDP" or
config --set="config.system.snmp.protocol3=TCP"
To set the SNMP Manager Version field:
config --set="config.system.snmp.version3=3"
To set the SNMP Manager v1 & v2c community field:
config --set="config.system.snmp.community3=public"
To set the SNMP Manager v3 Engine ID field:
config set="config.system.snmp.engineid3=0x8000000001020304"
.. replacing 0x8000000001020304 with the hex Engine-ID
To set the SNMP Manager v3 Security Level field:
config --set="config.system.snmp.seclevel3=noAuthNoPriv" or
config --set="config.system.snmp.seclevel3=authNoPriv" or
config --set="config.system.snmp.seclevel3=authPriv"
To set the SNMP Manager v3 Username field:
config --set="config.system.snmp.username3=username"
To set the SNMP Manager v3 Auth. Protocol and password fields:
config set="config.system.snmp.authprotocol3=SHA" or
config --set="config.system.snmp.authprotocol3=MD5"
config --set="config.system.snmp.authpassword3=password 1"
To set the SNMP Manager v3 Privacy Protocol and password fields:
config set="config.system.snmp.privprotocol3=AES" or
config set="config.system.snmp.privprotocol3=DES"
config --set="config.system.snmp.privpassword3=password 2"
Once the fields are set, apply the configuration with the following command:
config --run snmp
You can add a third or more SNMP servers by incrementing the "2" in the above commands, e.g.
config.system.snmp.protocol3, config.system.snmp.address3, etc

Table of Contents

Other manuals for Black Box LES1508A

Related product manuals