SERVSWITCH™ DKM CONFIGURATION
49
Switch Options:
Field Selection Description
Allow Sharing
Y/N
Y – User may connect to any unlocked CPU with
Video Access only. Note: Switch with <Space> Key,
no <Return>.
N – No Sharing.
Force
Connect
Y/N
Y – User may connect to any unlocked CPUwith full
control pushing any previous user to Video Access
only. Note: Switch with <Return> Key.
N – No Force Connect.
Force
Disconnect
Y/N
Y – User may connect to any unlocked CPUwith full
control with any previous user being disconnected.
Note: Switch with <Return> Key.
N – No Force Disconnect.
KVM
Listview
Y/N
Y – OSD is opened with Menu „KVM List“ (default)
(Dynamic display of available CPU Ports).
N – OSD is opened with Menu „KVM Switch“
(Static display of available CPU Ports)..
KVM Auto
Close
Y/N
Y – Immediate exit from OSD after switching CPU
Port in Menu „KVM List“ or„KVM Switch“ with
immediate display of the new CPU.
N – No Auto Close.
If „Allow Sharing“ is activated, the current user of a CPU will
not note if other users gain video access to his CPU.
To Next Page
Loading...
Need help?
General
