ServSwitch™ DKM
48
Access Options:
Field Selection Description
Enable Login Y/N
Y – Login required to access the OSD with user name
and password. After login, the user will remain logged
in until he explicitly logs out or an Auto Logout has
been performed (cf. below). KVM Switching with Hot
Keys requires the user to be logged in.
N – NoLogin required.
User Matrix Y/N
Y – User access restricted to CPU’s explicitly unlocked
in the User Matrix (see page 53). User matrix mode
requires user login and implies „Enable Login“ = „Y“.
KVM Switching with Hot Keys requires the user to be
logged in.
N –User Matrix disabled.
CON Matrix Y/N
Y –CON Port connectivity restricted to CPU’s
explicitly unlocked in the CON Matrix (see page 57).
N – CON Matrix disabled.
Auto
Disconnect
Y/N
Y – Only active if „Enable Login“ or „User Matrix“ are
activated: CON Port is disconnected from current CPU
Port upon entering into the OSD.
N – Current Connection is held
Timeout sec
### – Time of inactivity, after which OSD is closed
automatically.
0 sec – No Timeout.
Auto Logout min
### – Time of inactivity, after which the user at this
console is logged out from OSD access automatically.
0 min – Immediate Logout from OSD after closing the
OSD.
To Next Page
Loading...
Need help?
General
