94
LEGACY
Ref. Part No. Required. Description
1. 55000171 1 Kit Heat Exchanger, Rear
2. AAM2089 1 Spring Adjuster Assembly
3. AAM2707 1 Hub & Spindle Assembly
4. AAM2750 1 Wheel 5.00 -15 4 Ply 15 x 5 x 5 White 4 hole
GDI 200 With Pump Distribution (Rear Mount)
Parts and Assembly (Bundle 20200119)
BOM ID Qty Item No Description
1 1 55000171 KIT, HEAT EXCHANGER, REAR OF FRAME MOUNT
1A 1 AM4015 HOSE RETAINER, CLOSED LOOP, 6” & 7” MOUNTING
1B 1 AM4553 HEAT EXCHANGER MOUNTING
1C 2 BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED
1D 2 BP3002 WASHER, LOCK, 3/8”, PLATED
1E 2 BP3034 NUT, HEX, 3/4”-10, GRADE 2, PLATED
1F 2 BP3035 WASHER, LOCK, 3/4”, PLATED
1G 1 BP3045 U-BOLT, 3/8”-16 X 6”W X 5”L
1H 1 BP3350 U-BOLT, 3/4”-10 X 6”W X 7-11/16”L, PLATED
BOM ID Qty Item No Description
2A 1 AM2191 CLEVIS SPRING ADJUSTER
2B 1 AM2192 SPRING CANISTER, GROUND DRIVE WHEEL
2C 2 AP2881 SPRING, 2.472” OD X 5.875” OAL, .468” WIRE DIAMETER
2D 1 BP3028 WASHER, FLAT, 1”, PLATED
2E 1 BP3223 NUT, HEX LOCK, 1”-8
2F 1 BP3572 TENSION BUSHING, 1-1/4” X 1” X 3/4” OAL
BOM ID Qty Item No Description
3A 1 AP2023 BEARING CONE, LM 67048
3B 1 AP2024 BEARING CONE, LM 11949
3C 1 AP2029 PIN, COTTER, 5/32” X 1-1/2”
3D 5 AP2049 WHEEL BOLT, 1/2”- 20 X 1”
3E 1 AP2052 GREASE SEAL, CR 14974
3F 1 AP2053 HUB CAP, 1524
3G 1 AP2124 HUB WITH CUPS, 5 BOLT, 511300-5
3GA 1 AP2075 BEARING CUP, LM 11910
3GB 1 HUB HUB,5 BOLT, 5.5” BOLT CIRCLE, 4” PILOT
3GC 1 AP2524 BEARING CUP, LM 67010
3H 1 AP2169 SPINDLE, 1-3/4” X 13”, S7151-H-00
3I 1 AP2704 NUT, SPINDLE, 3/4”-16
3J 1 AP2705 WASHER, SPINDLE, 1-1/2” X 13/16” X .134”
BOM ID Qty Item No Description
4A 1 AP2002 TIRE, 5.00-15, 4 PLY SURE GRIP TRACTION
4B 1 AP2250 RIM, 15 X 5 X 5, WHITE WITH FOUR EXTRA HOLES
4C 1 AP2790 VALVE STEM, METAL
To Next Page
Loading...
