Operation in working mode
106
7.7.3 Switch on the mixing unit
1. Set and activate the mixing time on the multifunctional display.
Risk of injury from inappropriate operation.
The mixing time must not be adjusted while the machine is running.
− Always set the mixing time before switching on the mixing unit.
− Do not stay in or close to danger zones.
2. Set the two-position switch to the "Mixing unit on" position.
➢ The necessary operating pressure builds up after the machine has
been started. The vessel pressure can be read off on the pressure
gauges.
➢ Likewise, the belt tensioner, which is pressurised, tensions the
drive belt of the mixing unit.
To Next Page
Loading...