Risk of crushing due to tilting components.
Faulty assembly can cause tilting of the machine.
− When setting up the machine, the machine feet on the mixing and
delivery vessel must be on the ground and the support wheel must be
sufficiently extended.
− If the ground is loose, you can use planks, for example, to prevent
unintentional movement of the machine.
− The towing vehicle must have the same on-board voltage as the
machine.
Location criteria
The location of the machine must meet the following criteria:
− Firm, level and horizontal ground,
− Existence of sufficient free space for unhindered working, e.g.
correspondingly large distance to walls or other obstructions,
− The necessary working space must be available for maintenance and
service work,
− There must be no explosive or other hazardous substances in the
vicinity that can be sucked in,
− Largely dust-free environment,
− There must be good ventilation so that no exhaust gases are sucked in,
− The machine must not be installed under danger points (e.g. danger of
falling objects),
− It should be favourable for hose installation so that the hoses do not
cause any danger to third parties and the delivery hoses can be laid on
the shortest possible route.
− Escape possibilities in case of danger to the operating person must be
considered,
− The machine is not intended for operation in potentially explosive
atmospheres.
To Next Page
Loading...