63
5 Transport
The machine is either collected by the customer or delivered by a forwarding
agent. It is not packaged.
5.1 Transport inspection
Upon receipt of the machine, check the delivery scope for completeness and
damage.
The transport restraints must be removed only after the machine has been
set up.
In the event of externally visible transport damage, proceed as follows:
− Inform the manufacturer immediately.
− Do not accept the machine or only under reserve.
− Enter the extent of damage on the transport documents and note it on
the delivery note of the transport company or, in case of collection,
directly on the acceptance certificate.
➢ Immediately enter a complaint for any defects upon receipt of the
machine. Claims based on transport damage can be asserted only
within the valid complaint periods.
5.2 Transport restraints
The transport restraints may be dismantled only before work is started. They
must be stored in a safe place and reassembled before driving operation.
To Next Page
Loading...