46
Central lubrication
The automatic lubrication machine ensures regular lubrication of the front
and rear seals and the front and rear bearings of the mixing shaft.
The lubrication system is activated via the multifunction display. See Section
14.3.
The fill level and function of the lubrication system must be checked
regularly. The existing grease quantity is sufficient for approx. 500 operating
hours in standard operation.
4.4.1 Options
Filter hoods
The filter hoods protect the cooling unit from rapid and excessive
contamination by dust.
The filters also allow the cooling unit to be cleaned more quickly and easily.
Air blast gun / cleaning gun
The optional air blast gun / cleaning gun can be used as a cleaning tool. It is
connected to the internal air extraction connection of the machine.
GPS tracking machine
With the GPS tracking machine the machine can be located at any time.
Ball head coupling with lock
The lock serves as an anti-theft device.
To Next Page
Loading...