92
7.5.1 Preparing the feeder for filling
The feeder must be prepared for filling both the version with feeder and the
version with feeder and scraper.
1. Make sure the rear light unit is dismantled. Disassembly is described in
Section 6.7.
2. Loosen the safety catch on the feeder, which is intended for transport.
To do this, remove the lashing strap from feeder and mixing and
delivery vessel.
➢ Keep the lashing strap in a safe place. Transporting the machine
with the version feeder or feeder with scraper is not permitted
without securing the lashing strap.
To Next Page
Loading...