Risk of injury due to insufficiently suitable towing vehicle.
Coupling to an inadequately suitable towing vehicle can lead to traffic
accidents.
− Only towing vehicles with a coupling device which have a suitable
carriage shaft load may be used.
− The towing vehicles used must be sufficiently powered and have
sufficient braking power.
− The towing vehicle must have the same on-board voltage as the
machine.
Coupling to a ball coupling is described in the following. If a DIN towing eye
is used, coupling is carried out via the towing vehicle's coupling device.
Further information on coupling can therefore be found in the documentation
of the coupling device.
1. Secure the machine against rolling away with the brake shoes on both
wheels.
To Next Page
Loading...