Risk of injury from moving components.
Movable parts can cause severest injuries during operation.
− Do not stay in or close to danger zones.
− Never reach into running devices.
− In particular, never open the dome screen during operation.
− Never take the safety switch, which protects against opening the dome
sieve during operation, out of operation.
− Only carry out work when the dome screen is closed.
Checks before commissioning
The following basic checks must be carried out before each commissioning:
− Is the machine installed correctly.
− Is the machine secured against rolling away.
− Does the ground have sufficient bearing capacity.
− Are all safety and protective devices fitted and functional.
− Is the machine technically in order.
− Are all cables and connections connected and secured.
− Are all machine closures closed (tank, oil, cooler, battery, filter, etc.).
− Are all lubrication points greased sufficiently.
− Is the central lubrication functioning properly.
− Are the delivery hoses, couplings and seals in perfect condition.
− Is the discharge stand mounted correctly.
− Do delivery hoses and couplings match each other.
− Are securing devices (hose holders, suspension eyes) for the laid
delivery hoses are in place. Are the delivery hoses and delivery hose
connections adequately secured.
− Have the delivery hoses been laid correctly (see Section 7.4).
To Next Page
Loading...