BMS alpha CR - Machine Equipment

3
Technical data
3.3
Identification of the machine
34
3.3.2 Machine equipment
Machine type
alpha
CR
Coupling device
DIN towing eye
Ball head coupling
Lighting voltage
12 V
13 pin plug
24 V
15 pin connector
Certification
100 km/h
80 km/h
Machine design
Standard
Feeder
Feeder/scraper
Delivery scope
Operating instructions
Turned over
Storage box
Lubrication gun
Equipment options
GPS positioning machine
Filter hood
Air blast gun / cleaning gun
Silo construction and silo control
Ball head coupling with lock
➢ In addition, you will for all versions need:
− a discharge stand,
− hoses with couplings (total length at choice)
The hoses must have a minimum diameter of 50 mm and be
suitable for an operating pressure of min. 10 bar.