EasyManua.ls Logo

BMS alpha CR - Working Mode: Operational Hazards

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Work mode
7
Operation in working mode
7.7
95
7.7 Operation in working mode
WARNING
Danger of injury from intervention in the mixing unit.
If the two-position switch is in the "Mixing unit off" position, friction of the
power belt can cause the mixing unit to continue to be driven.
Do not stay in or close to danger zones.
Never reach into running devices.
In particular, never open the dome screen while the machine is
running.
Never take the safety switch, which protects against opening the dome
sieve during operation, out of operation.
Only carry out work when the dome screen is closed.
NOTE
Never switch the machine off when it is full and leave it standing for a
longer period of time. Material may settle.
Therefore, avoid pauses in the material feed, as material standing in the
pump and hose can solidify (risk of blockage!).

Table of Contents