155
10.5.5 Inspection every 1500 operating hours
➢ We recommend having the inspection carried out by BMS or a BMS approved specialist workshop, as
the maintenance work is decisive for the safety, trouble-free operation and service life of your BMS
alpha
CR
.
Change motor oil filter.
*
Replace if necessary
Specify BMS no. chassis number.
Check hose clamps on
cooling machine and motor.
If leaking, tighten and replace if necessary.
Check battery acid level.
Top up the acid level if necessary.
Check electrical connections.
Pay attention to corrosion.
Clean or replace if necessary.
Tyre pressure (see Section 3.1)