EasyManua.ls Logo

BMS alpha CR - Tyre Changing Procedure

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
10
Maintenance and repair work
10.8
161
10.8.1 Changing tyres
CAUTION
Risk of injury from heavy loads.
Standing under a jacked-up trailer/vehicle can cause injury if the
trailer/vehicle falls.
Do not stand under the trailer/vehicle when the trailer/vehicle is jacked
up.
Wear personal protective equipment.
The trailer has no spare wheel. However, we recommend having a
spare wheel in the towing vehicle.
Figure 64: Changing tyres
1. Turn off the machine.
2. Apply the parking brake and place the brake shoes under the stationary
wheel.
3. Slightly loosen the wheel nuts (1) of the wheel to be changed.
4. Use a jack (2) to jack up the trailer on the corresponding side. The
contact points (3) for the jack (2) are located under the axle, as close as
possible to the tyre.
Refer to the instructions for the towing vehicle for how to use the
jack.
5. Remove the wheel nuts (1) of the wheel to be changed.
6. Remove the wheel.

Table of Contents