27
2.10 Working safely
During work on components, assemblies or individual components, persons
can be injured on the danger points through unauthorized start-ups of the
energy supply.
Before any work on components, assemblies or individual components,
observe the procedure for securing against restarting described in the
following.
Before starting work
1. Stop the machine.
2. Disconnect the battery.
3. Attach a warning to the control system and enter the name of the
responsible person authorised to switch the machine back on in the
label.
After completing the work
1. Reinstall all safety devices properly and check their function.
2. Ensure that there are no persons at the danger points and in the entire
danger zone.
3. Connect the battery.
4. Subsequently remove the sign and release the main switch.
To Next Page
Loading...