11
1.6 Limitation of liability
All information and notes in these operating instructions were compiled
taking into consideration valid standards and regulations, the state of the art
as well as our long-standing insights and experiences.
The obligations as well as the general terms and conditions agreed in the
supply contract and the regulations valid at the time of contract conclusion
apply.
The manufacturer will not assume any liability for damage resulting from:
− failure to observe the operating instructions,
− use other than the intended one
− personnel that are not trained and not instructed,
− unauthorized/technical modifications and changes,
− improper assembly, commissioning, operation and maintenance of the
machine,
− Failure to observe the notes in the operating instructions regarding
transportation, storage, assembly, commissioning, operation,
maintenance. This applies in particular to the 1
st
inspection after 50
operating hours,
− use of not approved/incorrect spare parts that do not meet the
manufacturers specifications.
1.7 Copyright protection
These operating instructions are protected by copyright for BMS-Bau-
Maschinen-Service AG.
The operating instructions include regulations and drawings or sections of
drawings of a technical nature that may not be copied, distributed or used
without authorization for competition purposes or disclosed to third parties
either in part or in full.
The operator of the machine is permitted to make copies – even in excerpts
– expressly for internal use in connection with the operation of the machine.
BMS-Bau-Maschinen-Service AG reserves the right to grant permission for
the use for publications or for forwarding copies or information from these
operating instructions to third parties.
Any violations will result in a claim for compensation for the manufacturer.
Additional claims remain reserved.
To Next Page
Loading...