55
4.7 Menus
The multifunction display shows machine statuses, settings can be made
and functions can be switched on and off. Navigation and selection of
buttons is done via the selector switch (see Section 4.6.2).
Selecting buttons
1. Highlight the button by turning the selector switch.
2. Press the selector switch.
This turns functions on and off and calls up menus.
Enter the value
1. Highlight the button by turning the selector switch.
2. Press the selector switch
3. Set the value by turning the selector switch.
4. Press the selector switch to confirm the set value.
To Next Page
Loading...