Stopping the working operation
113
Additionally with option feeder
Risk of injury from moving components.
Movable parts can cause severest injuries during operation.
− Do not stay within the swivel range of the feeder or its vicinity.
− Do not decommission safety devices.
− Wear the stipulated personal protective equipment.
1. Wash the outside and inside of the feeder with water and a hand brush
if necessary.
2. Preserve the feeder with a biodegradable BMS machine care product
3. Open the dome cover (see Section 7.7.6 on this).
4. Fold the hopper onto the filling dome of the mixing and delivery vessel.
(See also Section 7.7.1 on this).
5. Pull the "Raise/lower feeder" lever horizontally out of its latch and swivel
the feeder upwards until it is above the filling dome of the mixing and
delivery vessel.
Figure 57: Feeder transport restraint
6. Secure the feeder (2) with the lashing strap (1).
➢ Transporting the machine version with feeder or feeder with
scraper is not permitted without the lashing strap securing device
fitted.
To Next Page
Loading...