Stopping the working operation
115
3. Hook the scraper shovel in the shovel holder on the feeder.
4. Secure the scraper shovel with spring cotter pins (3).
➢ Transporting the machine version with feeder with scraper is
permitted only with a secured scraper shovel.
5. Insert the rechargeable battery of the radio transmitter into the charger
on the radio receiver in the motor compartment of the machine.
➢ Ensure that the radio transmitter battery is inserted into the
charger at the end of work.
If the battery is defective, send the device to BMS for repair.
6. Open the dome cover (see Section 7.7.6 on this).
7. Fold the hopper onto the filling dome of the mixing and delivery vessel.
(See also Section 7.7.1 on this)
8. Pull the "Raise/lower feeder" lever horizontally out of its latch and swivel
the feeder upwards until it is above the filling dome of the mixing and
delivery vessel.
Figure 59: Transport restraint feeder/scraper
9. Secure the feeder (4) with the lashing strap (5).
➢ Transporting the machine version with feeder or feeder with
scraper is not permitted without the lashing strap securing device
fitted.
To Next Page
Loading...