BMS alpha CR - 500-Hour Maintenance Checks

Maintenance
10
Maintenance schedules
10.5
151
Personne
l
Maintenance
Comment
Check gear holder for
deformation
Adjust if necessary.
Check upper and lower air
hoses.
BMS
Check check valves for dirt.
BMS
Check vessel vent
Check 2-bar switch-off.
BMS
Check dome cover bearing.
Replace if necessary
Check cover seal on dome
cover.
BMS
Check bearing of toggle lock.
Replace if necessary
Check hopper bearing.
Replace if necessary
* Maintenance is part of the maintenance kit no. W 500 BMS alpha
CR