Check battery acid level.
Top up the acid level if necessary.
Top up central lubrication.
BMS grease cartridge 2.5 kg
Check electrical connections.
Pay attention to corrosion.
Clean or replace if necessary.
Check motor and compressor
mountings.
Check power belt and belt
relief.
*
Check gearbox holder for
deformation.
Tyre pressure (see Section 3.1)
Check, adjust if necessary.
Check contacts of lighting and
illuminants.
Clean/replace contacts if necessary.
Replace illuminant if necessary.
Grease lubrication points.
BMS, lubrication points according to lubrication schedule
Check upper and lower air
hoses.