EasyManua.ls Logo

BMS alpha CR - Page 39

Default Icon
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Layout and function
4
Chassis
4.3
39
Overrun device
Figure 8: Overrun device
The coupling device is adjusted to the coupling height by means of the outlet
device (1). The carriage shaft remains parallel to the ground while the
coupling device can be adjusted in height.
Handbrake and brake shoes
Figure 9: Handbrake and brake shoes
The handbrake (1) as well as the brake shoes (2) are used to safely stop the
BMS alpha
CR
.
When parking the BMS alpha
CR
in connection with the towing vehicle, the
trailer must be secured with the handbrake. If the parking area is not level or
the trailer is standing without the towing vehicle, it must be additionally
secured with the brake shoes. The trailer has 2 brake shoes which are
mounted in special brackets at the front of the chassis on both sides.

Table of Contents