▷ Due to the different configurations of audio
and video files, e.g., bit rates greater than
256 kbit/s, or the many different compres‐
sion techniques, flawless playback cannot
be guaranteed in all cases.
Information on connection
▷ The connected audio device is supplied
with a max. power of 1 A if supported by
the device. Therefore, do not additionally
connect the device to a socket inside the
vehicle; otherwise, playback may be com‐
promised.
▷ Do not use force when plugging the con‐
nector into the USB interface.
▷ Do not connect devices such as fans or
lamps to the USB audio interface.
▷ Do not connect any USB hard drives or
USB hubs.
Bluetooth audio
At a glance
▷ Music files on external devices such as au‐
dio devices or mobile phones can be
played back via Bluetooth.
▷ The sound is output on the vehicle loud‐
speakers.
▷ The volume of the sound output is de‐
pendent on the device. If necessary, adjust
the volume on the device.
▷ Up to four external devices can be paired
with the vehicle.
Requirements
▷ The device is suitable. Information under
www.bmwusa.com/bluetooth.
▷ The device is ready for operation.
▷ The ignition is switched on.
▷ Bluetooth is activated on the vehicle, refer
to page 79, and on the device.
▷ Bluetooth presets must be made on the
device, such as for a connection without
confirmation or visibility; refer to the device
operating instructions.
▷ A number with at least four and a maximum
of 16 digits is defined as the Bluetooth
passkey. It is only required once for pairing.
▷ Vehicle is stationary.
Pairing and connecting
Pairing a device
To avoid becoming distracted and pos‐
ing an unnecessary hazard both to your own
vehicle's occupants and to other road users,
only pair the device while the vehicle is station‐
ary.◀
1.
"Settings"
2. "Connections"
3. "Bluetooth®"
4. "Add new device"
The Bluetooth name of the vehicle is dis‐
played in the Control Display.
5. Perform additional steps on the device, re‐
fer to the device operating instructions: for
instance, search for or connect the Blue‐
tooth device or a new device.
The Bluetooth name of the vehicle appears
on the device display.
6. Select the Bluetooth name of the vehicle
on the device display.
7. You are prompted by the iDrive or mobile
phone to enter the same Bluetooth pass‐
key. Enter the passkey and confirm.
Or:
Compare the control number in the display
of the vehicle to the control number in the
display of the mobile phone. Confirm the
control number in the mobile phone and in
the vehicle.
"OK"
Seite 55
External devices Entertainment
55
Online Edition for Part no. 01 40 2 926 935 - X/13
To Next Page
Loading...
