BMW iDrive - Restoring the Software Version

Installation of the software must only be car‐
ried out while the vehicle is stationary.
1. Switch on the ignition.
2. "Settings"
3. "Software update"
4. "Update software"
5. "BMW TeleService"
6. "Download software"
7. "Install software."
8. "OK"
9. Wait for installation.
10. Switch off the ignition, and wait until the
Control Display has shut down.
Restoring the software version
The software version before the last software
update or the version before the first software
update can be restored.
The software may only be restored when the
vehicle is stationary.
1.
Switch on the ignition.
2. "Settings"
3. "Software update"
4. "Restore previous version"
5. "Previous version" or "Default SW status"
6. "Remove software"
7. "OK"
8. Wait for installation.
9. Switch off the ignition, and wait until the
Control Display has shut down.
Seite 59
External devices Entertainment
59
Online Edition for Part no. 01 40 2 926 935 - X/13