Operating Instructions ACTIVE 06/07168
168 Operating Instructions ACTIVE 06/07
Operation mode speed controller, parameter Operation Mode 440 = 4
This operation mode is suited for speed controls with an analog actual value transmit-
ter (e.g. analog speedometer via analog input or HTL encoder via frequency input).
The motor is accelerated or decelerated according to the control deviation.
The output frequency is limited by the
Maximum frequency 419.
Technology
Controller
Act. Percentage
Source
478
Ref. Percentage
Channel
Ref. Percentage
Source
476
Amplification
444
P
I
Integral Time
445
+
+
-
Max. P-Component
Limitation
Max.
I-Component
To Next Page
Loading...
Need help?
General
