Safety
EN
94 bora.com
ö
DANGER
Risk of electric shock from damaged appliance
A damaged appliance can cause an electric shock.
u
Check the appliance for visible damage prior to installation.
u
Do not install or connect any damaged appliances.
u
Do not operate any damaged appliances.
ö
DANGER
Risk of electric shock from incorrect stripping of cables
Incorrect stripping of the connection cable to external switching devices results
in a risk of electric shock.
u
Ensure that the connection cable is secured with the strain relief clamp
within the control unit.
u
Ensure that the stated stripping lengths are adhered to.
PLEASE NOTE
Appliance damage caused by incorrect wiring
The electrical safety of the appliance is only guaranteed if it is connected to a
protective conductor system that has been installed in line with regulations.
u
Work on electrical components must only be conducted by trained electrical
personnel.
u
Ensure that this basic safety precaution is met. The appliance must be
suitable for the regional voltage and frequency.
u
Check the information on the identification plate and in the event of
deviations, do not connect the appliance.
u
Do not connect the appliance to the mains until the duct system has been
installed or the recirculation filter has been fitted.
u
Only use the connection cables supplied.
To Next Page
Loading...
Need help?
General
