Functions and operation
EN
120 bora.com
Increasing or reducing the heat retention level
u
Swipe upwards or downwards until the required heat
retention level is reached.
or
u
tap or until the required heat retention level is
reached
or
u
tap the heat retention button until the required heat
retention level is reached.
Deactivating the heat retention function
u
Tap the corresponding cooking zone display.
u
Long press on the heat retention button .
or
u
swipe right down to the bottom (power level 0).
T
The heat retention function is deactivated.
T
The residual heat indicator appears in the cooking
zone display if necessary.
Selecting a power level also deactivates the heat
retention function.
5.6.10
Bridging function
Only in the case of X Pure
With the bridging function two cooking zones can be
combined to form one large cooking zone. The power
for the combined zones is then adjusted by a single
operating control. Power adjustment takes place
simultaneously (both cooking zones are operated on the
same power level). The bridging function is suitable for
heating food, e.g. in a roaster.
If both cooking zones are active before the
bridging function is activated, the lower power
level is adopted. If timers are active on the
cooking zones, the lower timer value will be
adopted for the bridging timer.
If no suitable cookware is detected (pan size
recognition) within 10 seconds with the bridging
function active, the bridging function will be
disabled and the cooking zones will be
deactivated.
Activating the bridging function
u
Tap both cooking zone displays at the same time.
T
The bridging function is now active.
T
The dividing line between the cooking zone displays
fades out.
T
Additional functions are displayed.
T
Both cooking zone displays show the same power
level.
T
Active additional cooking zone functions are adopted
(dual display).
T
Changes to the power level now apply simultaneously
to both cooking zones.
Deactivating the bridging function
u
Long press on one of the two cooking zone displays
with an active bridging function
or
u
tap both cooking zone displays with an active
bridging function simultaneously.
T
The bridging function is deactivated.
T
The dividing line between the cooking zone displays
is shown.
T
The power levels are set to 0.
T
If a cooking zone timer was active, it is deactivated.
T
If cookware is only detected on one of the two
cooking zones, the bridging function is cancelled
after ten seconds and the corresponding cooking
zone is deactivated.
5.6.11
Automatic bridging function
Only in the case of X Pure
If a large enough cooking pot or roaster is placed on the
two cooking zones that are one behind the other, they
will automatically be combined to form one large
cooking zone. The bridging function does not need to
be activated manually.
If the permanent pan size recognition function
is switched on (see"6.7Menu item 7:
Permanent pan size recognition"), the automatic
bridging function is also activated.
5.6.12
Switching off the cooking
zone
u
Tap the required cooking zone.
u
Swipe right down to the bottom until appears in
the cooking zone display
or
To Next Page
Loading...
Need help?
General
